Titan offers a wide variety of auxiliary hardware for wireline, slickline, coiled tubing and pipe conveyed applications.
Hunting Titan’s Modular Over The Line (OTL) Weight Bar is the easiest and most reliable way to increase tool string weight.
Hunting Titan’s Modular Over-the-Line (OTL) Weight Bars allow the user to increase tool string weight without having to cut the wireline or insert unreliable in-line sinker bars. The compact 3ft long sections are stackable and easily added to ensure tool string weight can overcome well pressure during run in hole. The Modular OTL Weights are also compatible with existing OTL fishing necks and cable head sizes 1-7/16” or 1-11/16”. The 1/2” ID bore accommodates standard wireline and coated line cables.
Hunting Titan’s Compensated Swivel ensures line torque relief and continuous downhole communication. Our internal analysis determined that the Hunting compensated swivel can be used with 30’ of guns up to 3-3/8” diameter.
The EBEZ® Feed Through Puck (EBEZ) is a spring-loaded conductor contact that is installed inside the end fitting for conventional perforating guns.
Cable heads play a vital role in all logging and perforating operations as they provide mechanical and electrical connections between the wireline cable and tool string.
Quick Change Assemblies are typically used to connect collar locating tools with perforating guns or plug setting tools.
Magnetic decentralizers allow the gun to stick to the casing minimizing standoff distance, which in turn maximizes perforating charge performance.
Productionlogging toolstrings generally require some form of centralization to allow proper flow measurements.
A wireline junk basket combined with a gauge ring performs two tasks in a quick single run.
Dump bailers are primarily used for dumping cement (sand is also an option) on pre-existing bridge plugs.
Sinker bars offer several uses in cased hole wireline operations.
Titan knuckle joints use nickel coated ball joints to increase the flexibility of wireline toolstrings by 10°.
Titan roller adapters can be placed in a wireline toolstring when in deviated wells.
Titan Pump Down Assemblies are available for various sizes and services.
The following table lists the most common type of slickline crossovers and couplings. Contact your local Titan representative for availability of adapters not catalogued.
Hunting’s cast iron bridge plug is rated for high pressure applications up to 10,000 PSI and 350°F. The Blockade Bridge Plug is a bottom set plug that is used to isolate wellbore segments for stimulation/treatment or Plug and Abandonment. The plug will securely set in any hardness of casing and is designed to prevent preset while running into the hole.
Hunting’s Titan Division manufactures flow tubes for use with wireline grease injection control heads. Flow tubes are sized with close tolerance to the diameter of the wireline/cable being used. Grease is then pumped into the annular void between the flow tube and the cable creating a pressure drop across each flow tube to create a hydraulic seal. Flow tubes are precision drilled from solid high strength steel bar for improved wear resistance and offered in various sizes.
Launch PDF
